Demulsifying cleaner

Advantages when using demulsifying cleaners for the removal of oils and grease

Demulsifying or quickly-separating cleaners are used in areas in which oils or oily contaminants and grease need to be removed. Following separation from the surface of the material, the oil or grease is separated - differently than with emulsifying detergents - from the cleaning solution's water phase.

The oil and grease-containing components rise to the surface of the bath and can be removed from this location quickly and continuously. This prevents the cleaned parts from becoming re-contaminated at the time of removal from the ultrasonic bath. The demulsification extends the life of the cleaning solution since the cleaner's active agents are only bound to the contaminants to a very limited extent, and thus become available time and again.

An oil separator OX can be optionally connected to the SONOREX TECHNIK modular device of series RM or ZM. Oil and grease layers that rise to the surface of the tank are led via the modular device's weir into the oil separator, where they are separated from the cleaning agent by means of gravity. The cleaned bath solution is returned to the circulation.


The following demulsifying, highly-concentrated TICKOPUR detergents are recommended:

Preparation and properties

Contamination

Objects to be cleaned

TICKOPUR R 36

tenside-free, non-foaming, gentle to the material,
mildly alkaline, pH 9.9 at 1 %

General soiling, oils, greases, distillation
residue, organic and inorganic residue, etc.

Especially for analytical and technical laser applications, steel, light and precious metals, ceramics, plastics, rubber, glass, optical glass

TICKOPUR TR 7

gentle to the material, with corrosion protection,
mildly alkaline, pH 8.9 at 1 %

Oils, greases, waxes, pigments, flux, soldering pastes, drilling, polishing and lapping residue, etc.

Metal, glass, ceramics, plastics, rubber, soldered frames

TICKOPUR TR 13

free of phosphates and silicates, not for light alloys, tin, zinc, alkaline, pH 11.9 at 1 %

Gumming, coking residue, soot, oils, grease, waxes, pigments, coatings; drilling, grinding, polishing and lapping residue, etc.

Steel, stainless steel, glass, ceramics, plastics, rubber

TICKOPUR TR 2

gentle to the material, with corrosion protection, mildly acidic, pH 3.6 at 1 %

Mineral residue, flash rust, grease, oils, waxes, pigments; drilling, grinding, polishing and lapping residue, etc.

Metal, glass, ceramics, plastics, rubber

Deze website maakt gebruik van cookies om ervoor te zorgen dat u de beste ervaring op onze website krijgt.Privacy-, cookieverklaring & Disclaimer